Connections
All connections are made through connectors on the coop Chicken Coop Kit (CCK) controller box. Power input is through the DC 5.5 x 2.5mm jack, and all other connectors are screw terminals on a 10-pin, 8-pin, and 6-pin plug.
Connector C1
-
Position 1: Interior Light (+)
-
Position 2: Interior Light (-)
-
Position 3: Exterior Light (+)
-
Position 4: Exterior Light (-)
-
Position 5: Fan (+)
-
Position 6: Fan (-)
-
Position 7: AUX 12V (+)
-
Position 8: AUX 12V (-)
Connector C2
-
Position 1: Light Sensor (+), connect to photo diode negative lead
-
Position 2: Light Sensor (-), connect to photo diode positive lead
-
Position 3: Coop Door Switch (Input)
-
Position 4: Coop Door Switch (GND)
-
Position 5: Run Door Switch (Input)
-
Position 6: Run Door Switch (GND)
Connector C3
-
Position 1: Coop Door (Out 1), positive for open, negative for close
-
Position 2: Coop Door (Out 2), negative for open, positive for close
-
Position 3: Run Door (Out 1), positive for open, negative for close
-
Position 4: Run Door (Out 2), negative for open, positive for close
-
Position 5: Coop Door Safety Sensor (+), brown wire
-
Position 6: Coop Door Safety Sensor (GND), blue wire
-
Position 7: Coop Door Safety Sensor (Signal), black wire
-
Position 8: Run Door Safety Sensor (+), brown wire
-
Position 9: Run Door Safety Sensor (GND), blue wire
-
Position 10: Run Door Safety Sensor (Signal), black wire